If you’re looking to renovate your kitchen, you’ll faced a dilemma. You love the beautiful granite counter-top , but the cabinet underneath seems to be old or worn-out for this moment.
A number of people are seeking for a new kitchen cabinet however, not the countertop particularly if they’re having a budget. What if you could improve the cabinetry in your kitchen without having to change countertops? What advice would expert plumbers have to offer?
There is a positive thing to be grateful for. You can make the necessary changes to your kitchen cabinets without having to remove the countertop. You should purchase modern cabinets at hardware stores, then take the cabinet that was previously installed beneath the countertop and clean it. Then, you are able to put in the cabinet that was older. In addition, you can utilize studs to help hold the countertop while you are waiting.
Can You Replace Kitchen Cabinets Without Replacing Countertop?
There is a way to replace the cabinets in your kitchen without causing damage to the countertop. In addition, the process is simpler than many think. In addition, the DIY repairs to kitchen cabinets will keep you from having to pay for woodworkers and plumbers who are professionals.
Be sure to provide enough support for the countertop constructed of stone or wood before you remove the cabinet’s base cabinets and frame. Because the countertop is a substantial structure, you should provide it with enough support so that it is in the way of replacement.
It is suggested to install studs on the countertop, so it doesn’t fall off the top, damaging the entire cabinet. We’ll be using studs of 2X4 in this instance.
How to Remove Kitchen Cabinets Without Removing Countertop?
It is essential to comprehend the. It is possible to swap out the cabinet in your kitchen that was old and to an updated one without cutting the countertop. What can you do to take down the cabinet without damaging countertops within your kitchen?
Many plumbers will suggest many things, the most efficient way to do changing the cabinet. It is not necessary to be concerned regarding the technical aspect of the cabinet.
Step 1: Loosening the Cabinet Installation Screws
If you take a look inside your kitchen cabinet, there are various screws that join the cabinet, as well as to the walls behind it. The screws hold the kitchen cabinet against walls. The screws need to be removed one at a time to prepare the cabinet to be removed.
It is important to think of two requirements in order to accomplish this. You must think about two requirements
- Do you know if the cabinet was constructed before flooring was installed? You may not be able to take the cabinet off completely in this scenario because it is connected to the flooring in your kitchen.
- Also, consider the base of your toe’s design and the construction. In some instances, the base of your toe may not be the work piece itself. It’s built using cabinets directly. If that’s the case, it’s impossible to take off the cabinet with no damage to it. It is essential to take out the cabinet’s boxes to replace the cabinets with new ones.
Step 2: Cutting the Plumbing Area Sides
The majority of the time, the rear of the cabinet is attached with the pipes. This can cause you to be unable to remove the cabinet off of its countertop beneath. It is crucial to make sure that you do not damage the plumbing system during the process.
You can use either a saber or salzsaw for the job. Use the one you are at ease with to get the greatest outcomes. Once you’ve identified the most popular saw use it to cut the plumbing of the kitchen. It is near the cabinet.
When you cut around the plumbing space, ensure your cuts are large enough. They must be large enough so that it can slide over the kitchen sink. Don’t rush to cut corners, or you could damage pipes.
Other cutting methods:
Many have had difficulty using the sabersaw or the salzsaw challenging. Therefore, it’s worthwhile to employ a different and efficient cutting technique. It can be utilized to cut the back of cabinet doors in kitchens, separating this from any plumbing areas which surround it.
It is recommended that you tap the cabinet’s walls using the maximum force to lift them from the area where you put them. After you’ve knocked the walls out of the back of the cabinet, make an effort to remove the walls by one at a time. Be careful not to damage your plumbing system.
Step 3: Using the Studs for Countertop Support
We’ve previously mentioned that kitchen countertops , including stone and granite countertops weigh a lot. They are therefore not supported by adequate support and could fall off the top, causing damage to the entire cabinet installation.
We’re using 2”x4 4” Studs to achieve this. In addition, the studs should provide enough strength and durability to hold the heavy countertop. If you’re removing one side of the cabinet, put the stud over it, to ensure that the countertop is properly supported. Utilize the same stud mounting method on the other sides to ensure that the countertop is maintained in good shape.
Step 4: Inspecting the Cabinet Walls
The cabinet’s wall is close to pipes, the cabinets have damp walls. This leads to the development of mold and mildew. This could cause harm to your kitchen cabinet and its walls. Furthermore the development of mold isn’t healthy for you.
Also, be aware of the cabinets’ walls and your pipe systems. If you see any signs of growth of mold, use commercial mold killers to get rid of the mildews and mold. In addition, you must employ dampening removal products on the walls to make sure they remain dry. This will keep the walls from getting damp in the future.
In the event that the mold has grown to a large extent and the walls are damaged, you should seek assistance from a professional contractor. Also, take a look at the plumbing and see if there is any leaks. If you’ve discovered leaks, you can apply Teflon tape to close them off accurately.
Step 5: Install the New Cabinet
Once you’re certain that the walls haven’t rattled it is now time to install your cabinet. It is necessary to push the walls of the cabinet into the sides you cut previously in close proximity to plumbing points. Once the cabinet is set up in a safe way it is possible to remove the studs which support the countertop.
Once you have done that, you can tighten each one at a time, and then check if there’s any space within the plumbing. It is essential to fill it with the right substance such as cement or Teflon to ensure the durability.
Can You Replace Countertops Without Damaging Cabinets?
A majority of kitchen remodel projects involve cabinet removal, but there are some planning to upgrade their countertops, too. The great thing is that it is feasible to replace countertops made of granite or stone easily , without damaging cabinets.
If the countertop has been getting stained or wears away, you should consider replacement with a new one. However, you should be extra cautious when removing any granite countertops since it is both heavy and strong. It is recommended to call a professional to help you complete the task. It might be costly however you’ll be able to avoid damaging your cabinet or injuring yourself.
Conclusion
What if you could put in kitchen cabinets, and not have to change countertops? It’s generally simple and easy to take the kitchen cabinet and replace it with countertops that have studs supporting the cabinets. Most important to do is stay in a positive state of mind and follow a step-by step method with care and caution. If you follow our suggestions on the removal of kitchen cabinets and you’ll find it simpler than you imagined it.
